Setting The Gain - Sony SRW-9000PL Operation Manual

Setting page for assignable button 1
The setting pages for buttons 2, 3, 5 to 8, N and C
have the same layout as that for button 1.
Setting page for assignable switch 4
On each page, move the cursor to the function to
be assigned and press the MENU SEL/ENTER
dial.
Setting the operation mode of the MENU
SEL/ENTER dial
You can reverse the operations that occur when
the MENU SEL/ENTER dial is turned in the
clockwise or counterclockwise direction. This
setting applies to the dial on the AP-1 (optional)
as well as to the one on the right-side panel of the
main unit.
Setting Operation
STD (default) Clockwise rotation moves the
cursor down (to the next position)
or increases a setting value.
RVS Clockwise rotation moves the
cursor up (to the previous
position) or decreases a setting
value.
70

Setting the Gain

Setting the Gain
If the gain of the video amplifier of the unit is to
be switched using the gain switch of the RM-
B150 Remote Control Unit, the gain values for
the corresponding switch positions must be
specified in advance.
Use the <GAIN ASSIGN> page of the Camera
>USER (OPERATION) menu.
<GAIN ASSIGN> page
Menu item Setting
GAIN [L] Gain value corresponding to the L
position of the gain switch
GAIN [M] Gain value corresponding to the M
position of the gain switch
GAIN [H] Gain value corresponding to the H
position of the gain switch
SHOCKLE SS Shockless gain on or off
GAIN
Any of –6, –3, 0, 3, 6, 9, or 12 dB can be set for
each of the L, M, and H positions, in any
sequence.
Note
The gain value is fixed to 0 dB in Cine-EI mode.