Setting the Status Display
on the Viewfinder Screen
and the LCD Monitor
This section explains the menu settings for the display of
the viewfinder screen. These settings are also used for the
display of the LCD monitor in the same way.
Selecting the Display Items
To select the items to be displayed on the viewfinder
screen (with the viewfinder DISPLAY switch set to ON)
and the LCD monitor, use the VF DISP 1 and VF DISP 2
pages of the OPERATION menu.
(How to select an item in the menu screen: Turn the
MENU knob to move the b mark to the desired item.)
1
Display the VF DISP 1 or VF DISP 2 page of the
OPERATION menu, and press the MENU knob.
For details on menu operations, see “Basic Menu
Operations” on page 132.
2
Select the desired setting item, and press the MENU
knob.
On the VF DISP 1 and VF DISP 2 pages, you can
select any of the following items to turn its display on
or off.
VF DISP 1 page
Item
Description
DISP REC
Displays the recording format.
FORMAT
DISP BIT RATE
Indication of HQ, SP or LP
recording.
DISP SYSTEM
System frequency.
DISP 16:9
Aspect ratio indication when
recording SD signals.
Zoom position indication.
1)
DISP ZOOM
1)
Focus setting.
DISP FOCUS
DISP BATT
Displays the battery voltage or
2)
battery remaining capacity.
REMAIN
DISP REC/PLAY
REC, PLAY, F REV, and F FWD
indications.
DISP TIME CODE
Displays the timecode.
1) This item may not appear depending on the mounted lens.
2) When an Anton Bauer battery system or a BP-GL65/GL95 battery
pack is installed, the remaining battery power is shown as a
percentage value (%) according to the setting of this item.
Page 137