Setting Gain Values For The Gain Switch Positions; Setting Up The Viewfinder - Sony HDC-900 Operation Manual

2 Turn the MENU SELECT knob to select the
desired setting, then press the MENU SELECT
switch toward ENTER.
The "?" mark changes back to the arrow marker
(c).
4
Repeat step 3, to make other settings as required.
5
When the menu operation is completed, set the
DISPLAY switch to ON.
The menu display disappears from the viewfinder
screen, and the display indicating the current status of
the camera appears along the top and bottom of the
screen.
Setting Gain Values for the
GAIN Switch Positions
You can set the video amplifier gains corresponding to
the L, M, and H positions of the GAIN switch. Use the
GAIN SW page of the OPERATION menu to make
these settings.
Proceed as follows:
1
Set the DISPLAY switch to MENU.
2
Turn the MENU SELECT knob to display the
GAIN SW page, and push the MENU SELECT
switch toward ENTER.
GAIN SW page
<GAIN SW>
LOW :c 0 dB
MIDDLE: 6 dB
HIGH : 12 dB
The current setting of each item appears to the
right of the item.
Item Contents
LOW Sets the gain value selected when the
GAIN switch is set to L.
MIDDLE Sets the gain value selected when the
GAIN switch is set to M.
HIGH Sets the gain value selected when the
GAIN switch is set to H.
3
4
5
The menu display disappears from the viewfinder
screen, and the display indicating the current status of
the camera appears along the top and bottom of the
screen.
The ZEBRA/VF DTL page of the OPERATION menu
is used to set up items related to the viewfinder.
Proceed as follows:
1
4
2
Turn the MENU SELECT knob to align the arrow
marker (c) with the item to be changed, and push
the MENU SELECT switch toward ENTER.
The arrow marker (c) will change into a "?" mark.
Turn the MENU SELECT knob to change the
setting to the desired value, and push the MENU
SELECT switch toward ENTER.
The "?" mark will change back to the arrow
marker (c), and the new setting will be saved.
The gain values for L, M, and H may be set to any
of the following values: –3, 0, 3, 6, or 12 dB.
To set the gain value for another switch position,
return to step 3.
To end menu operations, set the DISPLAY switch
to ON.

Setting up the Viewfinder

Set the DISPLAY switch to MENU.
Turn the MENU SELECT knob to display the
ZEBRA/VF DTL page, and push the MENU
SELECT switch toward ENTER.
ZEBRA/VF DTL page
<ZEBRA/VF DTL>
ZEBRA :c ON
: 1
ZEBRA1 : 70%
ZEBRA2 : 100%
VF DTL :( 0)
:( ON)
5
(Continued)
31(E)