Viewing The Abnormal <!> Display; Viewing The Function (Format/Switch Function)/System (System Settings) Display - Sony SRW-9000PL Operation Manual

Item Setting
C TEMP Set to ON to display the color
temperature.
Viewing the ABNORMAL <!>
Display
An ABNORMAL< ! > screen like the one shown
below appears if you press the CANCEL/
STATUS button when the basic status indications
are displayed in the viewfinder.
This screen allows you to check for items that are
set to non-standard settings.
You can select the items to display and define
non-standard settings on the <'!' IND> page of
the Camera >USER (OPERATION) menu.
Setting the ABNORMAL<!> indications
<'!' IND> page
For each item, select ON in the [IND] column if
you want that item to appear in the
ABNORMAL<'!'> screen.
Specify the standard setting in the [NORMAL]
column.
When an item is set to select ON in the [IND]
column, and the setting is other than the setting
specified in the [NORMAL] column, that
condition is indicated in the ABNORMAL<'!'>
screen.
66 Viewing Settings and Indications in the Viewfinder
Item Setting
ND ND filter selection: 1, 2, 3, 4, 5
(combination allowed)
WHITE White balance memory selection: P,
A, B (combination allowed)
5600K Custom mode: 5600K ON/OFF
Cine/Cine-EI mode: ON for Daylight,
OFF for Tungsten
SHUTT Shutter mode ON/OFF
FAN Fan operation mode selection:
AUTO1, AUTO2, MIN or MAX
Viewing the FUNCTION (Format/
Switch Function)/SYSTEM
(System Settings) Display
When the ABNORMAL<'!'> screen (see
page 66) is displayed, you can press the
CANCEL/STATUS button repeatedly to cycle
through the following screens.
FUNCTION 1 screen t FUNCTION 2 screen
t SYSTEM screen t basic status indications
t ...
FUNCTION 1 screen
This screen shows the functions assigned to the
assignable buttons/switch.
For functions that can be assigned, see "Assigning
Functions to Assignable Buttons/Switch" (page 54).
FUNCTION 2 screen