Viewing The Function (Format/Switch Function)/System (System Settings) Display - Sony SRW-9000 Operation Manual

This screen allows you to check for items that are
set to non-standard settings.
You can select the items to display and define
non-standard settings on the <'!' IND> page of
the Camera >USER (OPERATION) menu.
Setting the ABNORMAL<!> indications
<'!' IND> page
For each item, select ON in the [IND] column if
you want that item to appear in the
ABNORMAL<'!'> screen.
Specify the standard setting in the [NORMAL]
column.
When an item is set to select ON in the [IND]
column, and the setting is other than the setting
specified in the [NORMAL] column, that
condition is indicated in the ABNORMAL<'!'>
screen.
Item Setting
ND ND filter selection: 1, 2, 3, 4, 5
(combination allowed)
CC CC filter selection: A, B, C, D, E
(combination allowed)
WHITE White balance memory selection: P,
A, B (combination allowed)
5600K Custom mode: 5600K ON/OFF
Cine mode: ON for Daylight, OFF for
Tungsten
SHUTT Shutter mode ON/OFF
FAN Fan Operation mode selection:
AUTO1, AUTO2, MIN or MAX
Item Setting
EXT Lens extender (normal: OFF)
Viewing the FUNCTION (Format/
Switch Function)/SYSTEM
(System Settings) Display
When the ABNORMAL<'!'> screen (see page
59) is displayed, you can press the CANCEL/
STATUS button repeatedly to cycle through the
following screens.
FUNCTION 1 screen t FUNCTION 2 screen
t SYSTEM screen t basic status indications
t ...
FUNCTION 1 screen
This screen shows the functions assigned to the
assignable buttons/switch.
For functions that can be assigned, see "Assigning
Functions to Assignable Buttons/Switch" (page 48).
FUNCTION 2 screen
a Zebra settings
Displays the zebra settings.
b Gain switch values
Displays the values assigned to the L/M/H
positions of the gain switch.
Viewing Settings and Indications in the Viewfinder 59