Adjusting The Brightness Of The Subdisplay; Selecting Gamma Tables; Selecting Pages To Display In The Subdisplay - Sony SRW-9000 Operation Manual

Assignable buttons 1 and 2 setting page
You can assign the functions of buttons 1 and 2 on
the first and second lines, respectively.
Assignable button 3 and switch 4 setting
page
You can assign the functions of button 3 and
switch 4 on the first and second lines,
respectively.
Assignable buttons 5 and 6 setting page
You can assign the functions of buttons 5 and 6 on
the first and second lines, respectively.
Assignable buttons 7 and 8 setting page
You can assign the functions of buttons 7 and 8 on
the first and second lines, respectively.
Assignable buttons N and C setting page
You can assign the functions of buttons N and C
on the first and second lines, respectively.
Adjusting the Brightness of the
Subdisplay
You can adjust the brightness of the subdisplay to
one of eight levels.
52 Basic Settings with the Subdisplay
Subdisplay brightness adjustment page
The higher the value, the brighter the display.

Selecting Gamma Tables

You can select the gamma curves on the gamma
table selection page.
Gamma table selection page
Select the gamma table (STANDARD, HYPER,
SPECIAL, or USER) on the first line and the
gamma curve on the second line.
For details on the available gamma curves, see
"Selecting the Gamma" (page 71).
Selecting Pages to Display in the
Subdisplay
Use the setup mode of the subdisplay or the
OPERATION menu of the Camera menu.
To set the subdisplay to Setup mode
Hold the PAGE button pressed for more than five
seconds to set the subdisplay to Setup mode.
Subdisplay in Setup mode
Select a page in the first line, and select ON or
OFF on the second line.
Pages that are set to OFF will not appear in the
subdisplay.
Indication Target page
SHUTTER Shutter settings page
RAMP Ramp settings page
FORMAT Video format selection page
ND/CC Optical filter status page
GAIN/WHT/ Gain setting page
5600K