Adjusting The Brightness Of The Subdisplay; Selecting Gamma Tables - Sony SRW-9000 Operation Manual

Functions that can be assigned to assignable
switch 4
Menu indication Function
AWB Automatic white balance
adjustment
BARS Color-bar indication
TEST1 Test signal output
OFF None
Note
Even if AWB is assigned to assignable switch 4, AWB
does not function in Cine mode.
Functions that can be assigned to assignable
buttons 5 to 8
Menu indication Function
VTR SAVE Switch the VTR power supply
mode (SAVE, STBY)
BARS Display color bars
STOP Stop tape transport
REW Rewind the tape
PLAY Play the tape
F.FWD Fast forward the tape
GAIN Switch the gain position
WHITE BAL Switch the white balance
memory
OFF None
Assignable buttons 1 and 2 setting page
You can assign the functions of buttons 1 and 2 on
the first and second lines, respectively.
Assignable button 3 and switch 4 setting
page
You can assign the functions of button 3 and
switch 4 on the first and second lines,
respectively.
Assignable buttons 5 and 6 setting page
You can assign the functions of buttons 5 and 6 on
the first and second lines, respectively.
Assignable buttons 7 and 8 setting page
You can assign the functions of buttons 7 and 8
on the first and second lines, respectively.
Assignable buttons N and C setting page
The functions of buttons N and C on the first and
second lines, respectively.
Adjusting the Brightness of the
Subdisplay
You can adjust the brightness of the subdisplay to
one of eight levels.
Subdisplay brightness adjustment page
The higher the value, the brighter the display.

Selecting Gamma Tables

You can select the gamma curves on the gamma
table selection page.
Basic Settings with the Subdisplay 49