Vtr (Diag) Menu - Sony DIGITAL BETACAM DVW-707 Maintenance Manual

3-2. VTR (DIAG) Menu

The VTR (DIAG) menu is used for setting the maintenance menu of the VTR side and for various
diagnostics.
m
. Use the VTR (DIAG) menu in the state in which the tape transport stopped.
. Do not execute the VTR (DIAG) menu when remote control RM-P9/B150 is connected. The self-
diagnosis function and remote control function are not normally activated when the self-diagnosis is
executed.
Switch description
ADVANCE button
Operation
1. VTR (DIAG) menu activation
Push the DIAG button on the inside panel with the tip of a clip so as to display the DIAG menu on
the display panel.
The VTR menu appears on the VF screen.
2. PAGE selection
Press the ADVANCE button and select the PAGE.
To increment the menu number, press the ADVANCE button.
To decrement the menu number, press the ADVANCE and HOLD buttons simultaneously.
After selection, Press the SHIFT button.
Select the PAGE repeatedly until the desired ITEM is found.
3. ITEM selection
Press the ADVANCE button and select the ITEM.
After selection, press the SHIFT button.
4. ITEM setting
Press the ADVANCE button to change the set value.
After change, press the SHIFT button.
5. VTR (DIAG) menu termination
Press the DIAG button.
DVW-790WS/709WS/707
DVW-790WSP/709WSP/707P P1
Display panel
WARNING
HOLD
HOLD button
RESET
ADVANCE
SHIFT button
PRESET F RUN
REGEN SET
R RUN
CLOCK
DIAG
DIAG button
U-BIT
DF
SHOT
NDF
DISPLAY
CTL
TC
DATA
LIGHT
ON
OFF
CH-1 CH-2
LEVEL
SHIFT
0 0
10 10
AUTO
MANUAL
AUDIO SELECT
AUDIO IN
DATA
FRONT
DISPLAY REAR
TIME CUE IN
MIX
NO
CH-1 CH-2
3-2. VTR (DIAG) Menu
3-25