Group - Sam4s SER-7000 Manual

Group

Groups are designated to accumulate PLU sales for convenient reporting totals. A PLU can
send its' sales information to up to 3 groups. Group Link #1 is set in PLU programming.
Group Links #2 and #3 are set in PLU Status Group programming.
This program allows you to set up the groups that PLU sales will report to. There are 99
groups. Here you can program the group descriptor that appears on reports, and you can
determine whether that group will add to the total of all groups that appears at the end of the
Group report.
1. Select GROUP from
the P-MODE
PROGAMMING
MENU to view the
GROUP
PROGRAMMING
screen.
2. Select the group you
wish to program by
typing the group
number and pressing
ENTER, or by
pressing PAGE UP
or PAGE DN until
the appropriate group
displays.
3. Enter a descriptor of
up to 12 characters in
the descriptor field.
4. Select Y or N at the
"Do Not add to Group
Total?" field. Press
ENTER to set the
field and advance to
the next group.
5. Press ESC to return
to the P-MODE
PROGAMMING
MENU.
74 P-Mode Programming
0 1
G R O U P # P R O G R A M M I N G
D E S C R I P T O R :
A D D T O G R O U P T O T A L ?
E S C Y / N E N T P A G E U P / D N
G R O U P 1
Y
SER-7000 Program Manual