Program 150 - Plu Group Assignment - Sam4s ER-420 Series Operation And Program Manual

Program 150 - PLU Group Assignment

Each PLU may report to any three levels of groups. Group totals appear on reports, so that you can
track sales of different types of items. A group can also be used to designate items that are to print on
an optional kitchen printer.
Note: The PLU will report to group "0", if not programmed to report to groups 1-20.
84 • Program Mode Programming
1. Turn the control lock to the P position.
2. To begin the program, enter 1 5 0, press the SBTL key.
1 5 0
3. Select the PLU or PLUs you wish to program in one of the following ways:
•
Press a PLU key on the keyboard, or
PLU
•
Press the first PLU keys that are to receive the same status and Press the
last PLU keys, or
PLU PLU
•
Enter up to 15 digit number of the PLU and press the PLU key, or
Enter the PLU#,
up to 15 digits
•
Enter the number of the first PLU in a range of PLUs that are to receive the
same setting; press the PLU key. Enter the last number in the range; press
the PLU key.
Enter the PLU#,
up to 15 digits
4. Enter up to three 2-digit numbers representing the groups where you wish to
add the PLUs sales, i.e. enter 1 0 for group 10 or enter 0 4 for group four. Press
the X/TIME key.
st nd
1 Group 2 Group
5. To program additional PLUs, repeat from step 3, or press the CASH key to
finalise the program.
CASH
SBTL
PLU
Enter the PLU#,
PLU
up to 15 digits
X/TIME
rd
3 Group
PLU
ER420 Series