Kitchen Printer Routing - Sam4s SER-7000 Manual

Kitchen Printer Routing

Use Kitchen Printer Routing to link the kitchen printer assignment made to items with actual
printers. (See "PLU Status Group" on page 38 to link a group of PLUs to a printer
assignment number.)
168 P-Mode Programming
Because different registers might route kitchen printer items to different printers,
each register can be programmed separately in this program. (see "Kitchen
Printing/Video Options" (option #11) on page 57 to allow separate routing by
register.) All registers contain routing information for all of the registers in the
system.
NOTE: All registers are updated with changes made to this program at any
register.
Because it is sometimes necessary to change kitchen printer routing depending upon
the time of the day, (for example, separate hot and cold food kitchens may be active
during lunch and a single kitchen active during dinner) you can make assignments for
four different periods. The active routing period can be controlled automatically by
time or set manually.
Priority printing is also controlled with this program. The order in which items are
printed on the kitchen printer ticket is determined by the order in which kitchen
printer groups are listed for each printer #. (Groups at the left are printed first;
groups at the right are printed last.
SER-7000 Program Manual