Non-Plu Code - Sam4s SER-7000 Manual

NON-PLU Code

The NON-PLU Code program must be set if you wish to scan UPCs (using the EAN 13 code)
with embedded prices, weights or quantities.
Within the EAN 13 code, the first two digits (part a) are used as an identifier and the last digit
(part c) is used as a check digit. The remaining 10 digits (part b) contain the product code
and the price (or weight or quantity).
There are 11 identifier numbers available for non-PLU code programming: "02" and "20"
through "29". The purpose of this program is to define the format of the 10-digit part b for
each possible identifier. For example:
The structure of Non PLU identifier "02" can be defined to use 5 digits for the product
code and 5 digits for the price.
The structure of Non PLU identifier "20" can be defined to use 6 digits for the product
code and 4 digits for the price.
To Program Non-PLU codes:
1. Select NON-CODE
PLU from the P-
MODE MENU to
display the NON-
CODE PLU
PROGRAMMING
screen.
2. Choose one of the
non-PLU identifiers
("02" or "20" through
"29").
200 P-Mode Programming
021234500250
a) identifier
N O N - P L U C O D E P R O G R A M M I N G
1 .
2 .
3 .
4 .
c) check digit
b) product code & price
P L U # 0 2 ˜
P L U # 2 0 ˜
P L U # 2 1 ˜
P L U # 2 2 ˜
E S C E N T E R P A G E U P / D N
SER-7000 Program Manual