Sam4s SER-7000 Manual page 38

32 S-Mode Programming
1
2
6. The display will monitor the memory clear process, which takes about 1 minute.
When complete, press any key.
The display will prompt: "Enter Register Number (1-32)". Type the
register number on the numeric keypad and press ENTER.
The display will prompt: "Default Mem. Alloc.? [Y]". Press the Y/N key to
toggle from Y (yes) to N (no), then press ENTER.
The S-MODE PROGRAMMING MENU will display.
3
4
SER-7000 Program Manual