Serial Port Parameters Program Notes
FIELD
BAUD RATE
PARITY
DATA BITS
STOP BITS
LOGO SIZE (0-3)
LINES ON "HARD" SLIP
CUTTING AFTER
PRINTING?
IF PRINTER, KICK THE
DRAWER?
54
S-Mode Programming
Notes
Select 2400, 9600, 19200, 28800, 33600, 56000 or
OTHER from the pop-up window. (9600 is default.)
If you select OTHER, you may enter your own value.
Select NONE, EVEN, or ODD from the pop-up
window; NONE is default.
Select 8 or 7 from the pop-up window; 8 is default.
Select 1 or 2 from the pop-up window; 1 is default.
Controls the size of bitmap image that may be printed
on the guest check.
If hard check system is used, printing will stop on the
guest check after the number of print lines indicated
here is printed. Use this option to prevent over
printing when the bottom of the guest check is used as
a tear off receipt.
Enables auto cutter if applicable.
Allows printer to send the drawer kick signal.
SER-7000 Program Manual