Sam4s SER-7000 Manual page 113

#
41
42
43
44
45
46
SER-7000 Program Manual
FIELD
MENU SELECT WITHOUT
ENTER
RECEIPT STATUS ON
DISPLAY
CARD READER ENABLE
SALES FOR 0 STOCK ITEMS
DATE OF BIRTH ENTRY
COMP.
CHECK DIGIT OF NONPLU
CODE
Notes
You can select an item from a menu (or from
a WLU that does not allow functions) by
entering only the item number, rather than the
item number then ENTER. Note: If there
are more than 9 selections on the menu, you
must enter single digit selections with a
preceding 0, i.e. enter 01 to select item #1.
Choose Y to display the receipt on/off status
on the operator display. Receipt on displays
as "Ron"; receipt off displays as "Rof".
Choose Y to enable optional magnetic stripe
reader.
If Y, sale of items with zero stock is allowed.
If Y, date of birth for age verification items
must be entered at prompt. Operator may
press escape to sell items when set to N.
If N, Check ditis is not required for scanning
price embedded bar code.
P-Mode Programming 107