Sam4s SER-7000 Manual page 69

PLU Program Notes
FIELD
DESCRIPTOR
GROUP LINK #1
PLU STATUS LINK #
PIECE COUNT
SER-7000 Program Manual
Notes
Enter a descriptor up to 16 characters in length. Note
that the method you use to enter the descriptor depends
upon your selection for General Function Option #12
(see "General Function Options" on page 57.)
The default method is by using the Alpha Keyboard
Overlay. Type the descriptor using the typewriter-
style keyboard on the overlay.
If Alpha Code Entry is selected as an alternative,
type the codes representing each character, see
"Entering Alpha Characters" in the "Getting Started"
chapter for a list of alpha codes.
Enter the primary reporting group for the GROUPS and
PLU BY GROUP reports.
There are 99 groups available for reporting.
If you wish to assign a PLU to more than one
reporting group, assign the PLU to a PLU STATUS
LINK# that contains the necessary assignments for
GROUP LINK #2 and GROUP LINK #3. (See
"PLU Status Group" on page 38.)
The status link group contains the remainder of the
configurable options for this PLU. See "PLU Status
Group" on page 38.
Enter a value in this field if you wish to use Product
Mix and Product Projection reporting. The number of
units entered here will be reflected in product mix
reporting.
See "PLU Status Group" on page 38 to select
product mix items for this PLU item.
See "Product Mix Groups" on page 57 to set up
product mix items and time periods.
P-Mode Programming 63