String Reports - Sam4s SER-7000 Manual

String Reports

1. Select STRING
REPORTS from the
P-MODE
PROGRAMMING
MENU.
2. Type a string report#
and press ENTER, or
press PAGE UP or
PAGE DN until the
string report# you
wish to program is
selected.
3. Refer to "String
Report Program
Notes" tofill each
field.
4. Up to 24 reports may
be executed on a
string report. Press
PAGE UP or PAGE
DN or press the
of the sequence
numbers in the report.
5. Press ESC to return
to the STRING
REPORT
PROGRAMMING
MENU screen.
String Report Program Notes
FIELD
X/Z
LEVEL
RPT#
DESCRIPTOR
188 P-Mode Programming
S T R I N G R E P O R T #
D E S C R I P T O R
#
0 0
0 1
0 2
keys to view all
Notes
Select the X/Z field arrow. Press ENTER to open the window.
Select the X, Z, or CURRENT option by highlighting your
selection and pressing ENTER. Use the current option if you
wish to use the string for either X or Z reports. The string report
will look at he current control lock position (either X or Z) and
generate the appropriate report.
At the RPT LVL field, select the X/Z level (i.e. Z1, X2, etc.
Remember you must have allocated memory for the report level
if you wish to execute that report.)
At the RPT# field, type the report number you wish to execute in
the string. Press ENTER. The report descriptor will
automatically display.
1
S T R I N G R E P O R T # 1
X / Z L E V E L R P T #
X 0 0 0
X 0 0 0
X 0 0 0
E S C Y / N E N T E R P A G E U P / D N
P R O G R A M M I N G
D E S C R I P T O R
SER-7000 Program Manual