Sam4s SER-7000 Manual page 192

Custom Report Program Notes
FIELD
RPT#
TTL#
RED?
+/-
DESCRIPTOR
186 P-Mode Programming
Notes
With the field selected, press DONE to display the REPORT
LIST. Enter or select the number of the report from which the
total you wish to place on the custom report originates.
With the field selected, press DONE to display the TOTAL
LIST. Enter or select the number of the total you wish to
place on the custom report. You must first select a RPT#
before you can select a TTL#.
Enter Y if the line is to be printed in red ink, enter N for black.
Press ENTER to select "+", "-" or NON ADD from the pop-up
window. When the subtotal TTL# code (i.e.'999') is entered
on a later line, previous totals with a + or - designation are
added and printed.
The default descriptor automatically displays when the TTL# is
entered. If you wish, enter a new descriptor by replacing
default descriptor. Type new information into the field, press
ENTER.
SER-7000 Program Manual