Edit Ingredient - Sam4s SER-7000 Manual

Edit Ingredient

1. Select EDIT
INGREDIENT from
the INGREDIENT
INVENTORY
MENU to display the
INGREDIENT
PROGRAMMING
screen. The cursor
is positioned at the
next available
ingredient.
2. Add or edit
ingredients by
moving the cursor to
a field and filling in
information according
to the table below.
3. Press ESC to return
to the INGREDIENT
INVENTORY
MENU
Ingredient Program Notes
FIELD
ING#
DESCRIPTOR
COST
172 P-Mode Programming
I N G R E D I E N T P R O G R A M M I N G
I N G # D E S C R I P T O R
0 0 1
0 0 2
0 0 3
E S C Y / N E N T E R P A G E U P / D N
Notes
This field is the three-digit inventory number. The value
begins at 001 and goes up to the maximum number that is
assigned in memory allocation.
A 12-digit descriptor is set for the inventory item. (An
inventory item is an "ingredient" of a PLU.)
The cost of the item is the cost of the ingredient. The cost
can be entered accurate to three places after the decimal.
A L P H A
C O S T
0 0 0 . 0 0 0
0 0 0 . 0 0 0
0 0 0 . 0 0 0
SER-7000 Program Manual