Mode & Clerk Key Test; Ram Test - Sam4s SER-7000 Manual

Mode & Clerk Key Test
1. Select
MODE/CLERK KEY
TEST from the H/W
TEST MENU to
begin the mode/clerk
key test.
2. Turn the mode key;
the display indicates
the current key
position.
3. Press any key to
return to the H/W
TEST MENU.

RAM Test

1. Select RAM from the
H/W TEST MENU to
begin the RAM test.
2. The display monitors
the progress of the
test.
3. At the completion of
the RAM test, the
message "BASE
RAM OK" will
display if there are no
RAM problems.
4. Press any key to
return to the H/W
TEST MENU.
NOTE: This test is non-destructive. Performing this test will not affect the current
program or totals.
26 S-Mode Programming
M O D E / C L E R K K E Y T E S T
T U R N M O D E K E Y O R E N T E R C L E R K K
P R E S S A N Y K E Y T O F I N I S H
B A S E R A M O K
E X T . R A M S I Z E 0 ( 0 )
P R E S S A N Y K E Y T O R E T U R N
R E G M O D E
SER-7000 Program Manual