Sam4s SER-7000 Manual page 42

Memory Allocation Program Notes
1
2
3
4
5
6
7
8
9
10
36 S-Mode Programming
FIELD
# OF DIGITS IN REPORT
TOTALS (8-10)
# OF DIGITS IN REPORT
COUNTERS (6-8)
# OF PLU
# OF PLU STATUS GROUPS
# OF PRICE LEVELS PER
PLU (1-4)
PLU REPORT BY PRICE
LEVEL
# OF EMPLOYEES
# OF TIME ENTRIES PER
EMPLOYEE
USE GROUP BY EMPLOYEE
CHECK TRACKING METHOD
Notes
Determine the maximum size of report totals:
8, 9 or 10 digits.
Your choice assumes two digits to the right of
the decimal. For example 6 digits =
XXXX.XX or 7 digits = XXXXX.XX.
Determine the total # of PLUs, including
PLUs by code, by scanning or by
keyboard/keyboard level.
Determine the maximum number of status
groups to which you link PLUs. See "PLU
Status Group (PLU Status Link)" in "P-Mode
Programming" for more information.
Prices may be assigned at up to four different
price levels for each PLU. If you wish to
use price levels, you must determine the
number of price levels here. If Price levels
are set, they are set for all PLUs.
If selected, the PLU report will detail sales at
each level, rather than a total and counter for
sales at all levels combined.
Determine the total number of employees and
set the maximum use wish to use here.
Employees include all who use the register for
any purpose, including those using only the
time clock feature for clocking in/out.
Determine the maximum number of clock
entries that can be stored in the Z1 report.
After Z1, only summaries are stored on Z2
reports (or Z3, Z4 or Z5 reports, if
implemented.)
Determine if you wish to report GROUPS by
EMPLOYEE. If you choose Y, then you
can report up to 30 of the 99 groups for each
employee. See "Groups By Employee" on
page 57 to select which groups will report for
each employee.
Choose HARD or SOFT. Hard checks store
only the check balances; soft check store
check detail for the number of lines
determined at step 12.
SER-7000 Program Manual