Edit A Store - Sam4s SPS-500 Series Reference Manual

Field Name
Modem Time
Out Value
Modem Initial
String
IP Address or
IP Name
Port# That
ECR Listens
On
Use PC COM
Port# (1-32)
BAUD Rate
Download
PLUs After
Polling
Deactivate
This Store
Download
Programs Only
to Register #1
3. Click Exit to save store information.

Edit a Store

1. Choose Edit from the Stores menu to edit a store. The Edit Store Information dialog
displays with the fields appropriate to the connection type selected.
2. Complete the Edit Store Information dialog according to the table to the preceding pages.
3. Click Exit to save store information.
18  Stores
Required
/Optional
R Unless otherwise indicated, the default value of 99 will be
entered automatically when the store is created.
O Ignore this field unless attempting to use a modem other
than the recommended US Robotics modem. (This field is
to allow you to enter any initialization required for your
modem for polling or communications. Do not add the
command prefix "AT" in this string. Do not put into this
string any E, Q or V values. The software automatically
handles these values.)
O If connection is Internet, enter IP address or IP name.
O If connection is Internet, enter the port the router listens
on. (Default is 5000)
R Enter the PC serial port (COM1- COM32) that you are
using for communications.
Select the data transmission rate that matches the BAUD
R
setting in the "Define Serial Port Parameters" S-Mode
program at the SPS-500.
O Enter Y if you wish to download changed PLUs in a
polling session. When the session is finished polling, the
program will download any changed PLUs.
O Select the Deactivate This Store check box if you wish the
store to be inactive.
O If checked, program downloads will communicate only to
the SPS-500 in an IRC configuration that is connecting to
SAM500. If not checked, programs will be downloaded to
all SPS-500's in an IRC network.
Description/Instructions
SAM500 Reference Manual V1.0