How To Re-Date Mail (Running Mail) - Hasler IM-440 User Manual

DELTA2_US.book Page 43 Samedi, 5. avril 2008 3:50 15
Running Mail
To run mail, follow the procedure below after you have completed the steps in Se-
quence of Settings p.41.

How to Re-Date Mail (Running Mail)

How to Re-Date
The postage amount
Mail (Running
postage directly on mail pieces:
Mail)
1
2
If mail piece is bigger than mail path maximum thickness (see Mail
Specifications p.20), press
printed at once.
Otherwise, if you want to print several identical labels:
1
2
0
is displayed on the home screen. To print
Press . System motors start running.
Insert the mail piece(s)
into the mail path against
the rear-guide wall, side
to be printed facing
upwards (see How to
Use the Feeder p.32).
The mailing system applies postage and the mail piece (or
label) is sent to the catch tray.
Press and enter the number of labels.
Make sure the labels are available in the label dispenser (see
Filling the Label Dispenser p.67).
Press to print the labels.
to print a label. The label is
3
43