Hasler IM-440 User Manual page 37

DELTA2_US.book Page 31 Samedi, 5. avril 2008 3:50 15
Checking Machine State
The list below raises questions to answer from time to time to ensure your work will
not be interrupted during a run to change the ink cartridge, add funds into the
machine, etc.
Table 1 : Machine check list
Question...
Are the mailing system funds
sufficient to complete your
postage session?
Do you need to clear the batch
counter?
Is the sealing/moistening
device properly filled?
(if installed)
Is the scale properly zeroed or
tared?
Are labels in place in the ALD?
(if you plan to print on tape)
Is there enough ink in the car-
tridge?
You can be warned when the available funds get below a preset
value (see How to Set the Low-Funds Threshold p.131).
How to answer
Look at the funds counter at the bottom of the
screen, or:
1
Press and type to check funds balance.
To add funds, see How to Add Funds to the PSD
p.73.
Clear batch counters if you intend to issue a report
on the mail run you are about to start (see Batch
Data Report p.94).
See How to Reset Batch Counters p.66.
For sealing while printing the envelopes.
Before laying envelope(s) on the weighing plat-
form, your home screen should display 00 lb
0.0 oz. If __lb _._oz is displayed, perform a 'rezero'
of the WP.
See How to Rezero the Weighing Platform p.134.
See How to Fill the Auto Label-Dispenser p.67.
To display the level of ink in the printing headset,
see How to Display Ink Level and Cartridge Data
p.164.
3
31