How To Set The Default Printing Offset; How To Activate / Deactivate Fractional Postage - Hasler IM-440 User Manual

DELTA2_US.book Page 143 Samedi, 5. avril 2008 3:50 15
Printing Offset
The printing offset is the distance between the right edge of the envelope and the
imprint.

How to Set the Default Printing Offset

How to Set the
To change the default printing offset:
1
Default Printing
Offset
2
3
Fractional Setting
The fractional setting enables users to type fractional values when entering postage
values manually. Otherwise, the fractional value is always zero.

How to Activate / Deactivate Fractional Postage

How to Activate
To activate / deactivate fractional postage:
1
/ Deactivate
Fractional
Postage
2
As supervisor (see How to Log in as Supervisor p.124):
Press and type
or select the path:
> Default user settings > Base settings > Print offset
Set the > Default offset from a position list.
Press [OK] to validate.
As supervisor (see How to Log in as Supervisor p.124):
Press and type
> Default user settings > Default imprint parameters >
Fractional
Select Enable / Disable fractional and press [OK] to ac-
tivate or deactivate the fractional.
3.2.2
or select the path:
3.3.5
or select the path:
8
143