How To Change The Default Rate - Hasler IM-440 User Manual

DELTA2_US.book Page 140 Samedi, 5. avril 2008 3:50 15
Stamp Default Settings
You can set default parameters for the stamp elements that follow:
Rate
•
Text
•
• Ad Die.
You can create up to nine texts.
On list screens, a tick
Changing the Default Rate
See also
Managing Rates p.158
•

How to Change the Default Rate

How to Change
the Default Rate
8
Changing the Default Text
See also
• Managing Texts p.154
How to Change the Default Text
How to Change
the Default Text
140
indicates the default parameter.
To change the default rate:
1
As supervisor (see How to Log in as Supervisor p.124):
Press and type
> Default user settings > Default imprint parameters >
Default rate
2
Select the default rate.
3
Press [OK] to validate.
To change the default text:
1
As supervisor (see How to Log in as Supervisor p.124):
Press and type
> Default user settings > Default imprint parameters >
Text
2
Select the Default text from the list.
3
Press [OK] to validate.
3.3.3
or select the path:
3.3.1
or select the path: