How To Correct Postage Amount (Settings); How To Correct Postage Amount (Running Mail) - Hasler IM-440 User Manual

DELTA2_US.book Page 44 Samedi, 5. avril 2008 3:50 15
Correcting a Postage Amount
Sequence of Settings
The procedure below outlines steps in a recommended sequence to correct the
amount on mail.
3
The sequence is identical to Re-dating Mail (p.34), except for the following:
• Postage must be set to the desired amount, instead of

How to Correct Postage Amount (Settings)

How to Correct
Postage Amount
(Settings)
44
Make sure you have already completed the preparation steps
mentioned in Preparing and Starting your Work Session p.27.
Compulsory settings:
1
Make sure you are on the home screen of the [Standard]
type of stamp. The home screen indicates weight, postage
and currently selected rate as illustrated below.
2
Check or change the type of stamp.
Press to access the Build stamp/imprint screen:
The type of stamp is indicated on line 2 of the screen.
To select an option in the screen:
Highlight the option using the arrow keys
Then always press
To change the type of stamp, select the Type line, press
[OK] and then select [Standard] in the Type of stamp screen
and press [OK].
0
.
and
to validate your selection.