System Time-Outs And Settings; How To Adjust The Time-Outs - Hasler IM-440 User Manual

DELTA2_US.book Page 128 Samedi, 5. avril 2008 3:50 15

System Time-outs and Settings

8.6

System Time-outs and Settings

System settings include:
System motor time-outs
•
• Sleep mode time-out
Smart Start: function that automatically starts the system motors when you wi-
•
thdraw the mail piece from the weighing platform (see Choosing a Weighing Type
p.55).
System Time-outs
The system time-outs are defined as follows:
Table 1 : System time-outs
Start
8
Stop
Sleep

How to Adjust the Time-outs

How to Adjust
the Time-outs
128
The period of time the system waits for an envelope or label
after pressing . Once this time-out reached machine stops.
The period of time the system waits for the next envelope or
label after printing. Once this time-out reached machine stops.
Period of inactivity after which the system automatically swit-
ches to 'Sleep' mode (see Power Management p.19).
You can set a long Stop time-out to have time to feed the hopper
before the machine stops.
To adjust the screen contrast:
1
As user:
Press and type
> Batch settings > Time-out settings
2
Type each time-out using the keypad and press [OK] to
display the next screen, until the Summary screen is dis-
played.
3
Press [OK] to exit.
This is a user setting that only lasts as long as you are logged in.
2.6
or select the path: