DELTA2_US.book Page 180 Samedi, 5. avril 2008 3:50 15
Auto Feeder Jamming
Some envelopes are blocked in the Auto Feeder.
Possible causes
•
Mailpiece is too thick.
•
Mail size is incorrect.
Too many envelopes are on the
•
feed deck.
•
Envelopes are not properly in-
serted on the feed platform.
Sealing is ON while feeding closed
•
envelopes.
•
11
180
The mail transport path should be regularly cleaned. See Clea-
ning the Mail Path p.171.
Actions
1 Unblock the Automatic Feeder as
indicated below.
2 Correct the cause:
Mail sizes: see Mail Specifi-
cations p.20.
Envelope stack height: 4" max.
Envelope stacking: see Using
the Feeder p.32
1 Feed closed envelopes only with
sealing OFF.
2 Check that already closed en-
velopes are properly sealed at the
leading edge. Incompletely closed
envelopes will jam.