How To Add (Or Cancel) An Ad Die On The Stamp; How To Move The Stamp (Print Offset) - Hasler IM-440 User Manual

DELTA2_US.book Page 61 Samedi, 5. avril 2008 3:50 15

How to Add (or Cancel) an Ad Die on the Stamp

How to Add (or
To add an ad die to the stamp or cancel the ad die:
1
Cancel) an Ad
Die on the Stamp
2
3
4
Moving the Stamp (Print Offset)
On thick envelopes with pitched sides, apply a print offset to move the stamp away
from the edge of the envelope.

How to Move the Stamp (Print Offset)

How to Move the
To add an offset to the stamp position:
1
Stamp (Print
Offset)
2
Either:
Press
Press
> Built stamp/imprint
or
Select > Ad die and press [OK] (or type
The Select Ad die screen is displayed.
Select the ad die in the list or select None for printing no ad
die.
The icon indicates the current selection.
Press [OK] to validate your selection.
The Build stamp/imprint screen is displayed with updated pa-
rameters (home screen:
As user:
Press and type
> Batch settings > Print offset
The Print offset screen is displayed.
Select the offset and press [OK] to validate.
1
and type or select the path:
1
).
).
2.1
or select the path:
3
61