Hasler IM-440 User Manual page 44

DELTA2_US.book Page 38 Samedi, 5. avril 2008 3:50 15
3
38
In Differential weighing mode (
From the [Standard] home screen, to print postage on mail
pieces:
1
Place the pile of mail you want to process on the weighing
platform, and then follow the instructions on the screen or the
steps below.
2
Withdraw the first mail piece from the top of the stack. The
mailing system displays weight and postage on the home
screen and starts motors automatically.
3
To print the stamp, insert
the mail piece into the
base against the rear-
guide wall, side to be
printed facing upwards.
If mail piece is bigger than mail path maximum thickness (see Mail
Specifications p.20), press
printed at once.
The mailing system applies postage and the mail piece (or
label) is sent to the catch tray.
4
Repeat previous step of each piece of mail.
To quit the process at any time, press
When you remove the last object from the WP, the mailing sys-
tem asks if you want to print it. You can answer Yes or No. This
allows you to use a mail basket without having to declare a tare on
the WP.
)
to print a label. The label is
.