Hasler IM-440 User Manual page 38

DELTA2_US.book Page 32 Samedi, 5. avril 2008 3:50 15
Using the Feeder
The procedure below describes how to place a stack of mail pieces at the mail path
entrance.
Depending on the weighing method you will choose to run mail, you may have to
insert the envelopes one by one or to put a stack of envelopes on the hopper.
You may set envelopes to portrait feed.
3
How to Use the Feeder
How to Use the
Feeder
32
Taking a stack of mail pieces:
1
Fan the envelopes to separate them.
2
Bevel the edge of the stack.
3
Place the envelopes on
the hopper, their upper
edge resting against the
rear guide.
4
Adjust the side guide for
large envelopes.
adjust the guide, push it
gently to rest against the
envelopes, without
pressing.
Flap envelopes: close each flap separately (nested flaps are not
supported).
Do not try to seal self-adhesive envelopes.
Close them before feeding.
To