Settings Overview - Hasler IM-440 User Manual

DELTA2_US.book Page 123 Samedi, 5. avril 2008 3:50 15

Settings Overview

8.1

Settings Overview

This section describes two types of settings:
User interface settings, that only last as long as the user who applies them is
•
logged in
Supervisor settings, that set default or permanent characteristics of the user in-
•
terface, the system behavior or the mailing process.
Other user settings are described in the corresponding sections:
Processing Mail p.23, Maintaining your Mailing System p.161, etc.
User Interface Settings
The user interface settings described in the sections below are:
Setting the display language
•
• Adjusting the screen contrast
• Enabling/disabling keys beep and warning/error beep.
Supervisor Settings
The mailing system has one supervisor PIN code that allows you to configure the
mailing functions and perform other functions such as managing accounts and
access rights, issuing certain reports, etc.
The Supervisor PIN code of the system has been provided to your
organization in a separate distribution.
The supervisor settings allow you to:
• Change the default user interface settings
Modify system time-outs
•
Set funds warnings (high amount, low funds) and activate a funding PIN code
•
Define a default weighing method for mailing, and calibrate the weighing devices
•
• Design a default imprint (rate, text, ad die), activate the Automatic Date Advance
function and set a default printing offset
Activate sealing mode by default
•
• Enter connection parameters.
8
123