How To Re-Date Mail (Settings) - Hasler IM-440 User Manual

DELTA2_US.book Page 41 Samedi, 5. avril 2008 3:50 15
Re-dating Mail
Sequence of Settings
The procedure below outlines steps in a recommended sequence to re-date mail.
The sequence is similar to sequence Applying Standard Postage (p.34), except for
the following settings:
Postage must be set to zero
•
You do not have to weigh the mail piece.
•
You must begin with selecting the Type of stamp to gain access to the corresponding
parameters and be able to run mail.
Make sure you have already completed the preparation steps
mentioned in Preparing and Starting your Work Session p.27.

How to Re-Date Mail (Settings)

How to Re-Date
Compulsory settings:
1
Mail (Settings)
2
To select an option in the screen:
Make sure you are on the home screen of the [Standard]
type of stamp. The home screen indicates weight, postage
and currently selected rate as illustrated below.
Check or change the type of stamp.
Press to access the Build stamp/imprint screen:
The type of stamp is indicated on line 2 of the screen.
Highlight the option using the arrow keys
Then always press
To change the type of stamp, select the Type line, press
[OK] and then select [Standard] in the Type of stamp screen
and press [OK].
and
to validate your selection.
3
41