Hasler IM-440 User Manual page 52

DELTA2_US.book Page 46 Samedi, 5. avril 2008 3:50 15
Running Mail
To run mail, follow the procedure below after you have completed the sequence in
Sequence of Settings p.44.
How to Correct Postage Amount (Running Mail)
How to Correct
Postage Amount
3
(Running Mail)
46
The postage amount is displayed on the home screen. To print
postage directly on mail pieces:
1
Press . System motors start running.
2
Insert the mail piece(s)
into the mail path against
the rear-guide wall, side
to be printed facing
upwards (see How to
Use the Feeder p.32).
If mail piece is bigger than mail path maximum thickness (see Mail
Specifications p.20), press
printed at once.
The mailing system applies postage and the mail piece (or
label) is sent to the catch tray.
Otherwise, if you want to print several identical labels:
1
Press and enter the number of labels.
Make sure the labels are available in the label dispenser (see
Filling the Label Dispenser p.67).
2
Press to print the labels.
to print a label. The label is