Print-Quality Troubleshooting; Print-Quality Defect Definitions - Xerox Phaser 3300 Servce Manual

Print-Quality Troubleshooting

Print-Quality Troubleshooting

Print-Quality Defect Definitions

5-8
The following table lists the print-quality defect corrective procedure, their
definition, and the page where each corrective procedure is provided.
Defect
Light Image The overall image density is too light.
Dark or Black Image The entire image area is black.
Uneven Density Print Density is uneven between the left and
right sides.
Background Light or gray dusting contamination appears on
all or most of the page.
Ghost (1) There is ghosting at 75.5 mm intervals from the
OPC Drum.
Ghost (2) There is ghosting at 75.5 mm intervals on the
whole print.
Ghost (3) There is ghosting at 62.8 mm and 77.6 mm
intervals.
Ghost (4)
Vertical White Line There are faded or completely non-printed lines
along the page of the paper travel from the
leading edge to the trailing edge.
Vertical Black Line There are faded or black lines along the page in
and Band the direction of the paper travel from the leading
edge to the trailing edge.
Horizontal Black There are black lines running parallel with the
Band leading edge of the print.
Black/White Spot The toner image is not completely fused to the
paper. The image easily rubs off.
Stains on the front The background of the front of the page is
of the page stained.
Stains on back of the The background of the back of the page is
page stained.
Blank Page Print Out The entire image area is blank.
(1)
Blank Page Print Out The entire image area is blank. One or several
(2) blank pages are printed.
Definition
Phaser 3300MFP Service Manual
Page
page 5-12
page 5-13
page 5-13
page 5-14
page 5-14
page 5-15
page 5-15
page 5-15
page 5-10
page 5-10
page 5-11
page 5-12
page 5-16
page 5-16
page 5-17
page 5-17