Pick Up Roller Shaft - Xerox Phaser 3300 Servce Manual

Pick Up Roller Shaft

Phaser 3300MFP Service Manual
Note
To allow better access to the parts, lay the machine on its back. Refer to
"Laying the Unit on its Back" on page 8-4.
To remove the Pick Up Roller Shaft:
1. Release the lock and slide the shaft to the right.
2. Lift the latch on the cam to release it from the notch in the shaft.
3. Slide the cam and the bushing from the shaft, then remove the shaft from
the Duplex Guide Housing, as shown below.
Service Parts Disassembly
2
3
Shaft
Cam
Bush
1
Lock
4
s3300mfp-122
8-37