Xerox Phaser 3300 Servce Manual page 88

Error Messages and Codes
Message
Group Not Available
[Incompatible]
Install Toner
Invalid Server Address
Invalid Cartridge
Line Busy
[Line Error]
Invalid Toner
Low Heat Error Cycle
Power
LSU Motor Error Cycle
Power
LSU Hsync Error Cycle
Power
Main Motor Locked
Mail Exceeds Server
Support
Memory Dial Full
Memory Full
MP Tray Paper Empty
Network Error
[No Answer]
3-8
Meaning
You have tried to select a group location
number where only a single location
number can be used, such as when adding
locations for a Multiple Send operation.
The remote machine does not have the
requested feature, such as polling. This
message also occurs if the remote
machine does not have enough memory
space to complete the operation you are
attempting.
A print cartridge is not installed or bad
contact between CRUM terminals and
CRUM Board
The server address you have entered is
invalid.
The print cartridge you have installed is not
compatible with your machine.
The receiving fax machine did not answer
or the line is already engaged.
Your machine cannot connect with the
receiving fax machine or has lost contact
because of
a problem with the phone line.
The print cartridge you have installed is not
for your printer.
There is a problem in the fuser unit.
A problem has occurred in the LSU (Laser
Scanning Unit).
A problem has occurred in the LSU (Laser
Scanning Unit).
There is a problem in the main motor.
The mail size is larger than the supported
size by SMTP server.
You are trying to schedule a fax job when
memory for storing fax jobs is full.
The memory is full.
There is no paper in the multi-purpose tray. Load paper in the multi-purpose tray.
There is a problem with the network.
The receiving fax machine has not
answered after several redial attempts.
Suggested solutions
Use a speed dial number or dial a number manually
using the number keypad.
Reconfirm the remote machine features.
Install a print cartridge.
Enter the correct server address.
Install a Xerox-genuine print cartridge, designed for
your machine.
Try again after a few minutes.
Try again. If the problem persists, wait an hour or so
for the line to clear and try again. Or, turn the ECM
mode on.
Install a Xerox-genuine print cartridge, designed for
your printer.
Unplug the power cord and plug it back in. If the
problem persists, please call for service.
Unplug the power cord and plug it back inches. If the
problem persists, please call for service.
Unplug the power cord and plug it back inches. If the
problem persists, please call for service.
Open and then close the front cover.
Divide your mail or reduce the resolution.
Wait until a scheduled job is completed.
Delete unnecessary fax jobs and retransmit after
more memory becomes available. Alternatively, split
the transmission into more than one operation.
Contact your network administrator.
Try again. Make sure that the receiving machine is
operational.
Phaser 3300MFP Service Manual