General Information
Printer Options
Additional Memory
Optional 250-Sheet Feeder (Tray 2)
1-8
The Phaser 3300MFP printer options include:
Additional Memory (256 MB)
250-Sheet Feeder (Tray 2)
The standard 96 MB memory consists of 64 MB soldered to the board plus a
32 MB RAM DIMM in the memory slot. The one memory slot supports up to
256 MB for a maximum of 320 MB. Memory modules must meet the following
characteristics:
200 Pin DDR2 DIMM (8 chip type)
Unbuffered, Non-parity
The printer's Configuration page lists the amount of RAM installed in the
printer.
RAM DIMM
The Optional 250-Sheet Feeder increases the input capacity of the printer and
can be attached to the printer underneath Tray 1. The Optional 250-Sheet
Feeder is customer installable.
Note
Only one Optional 250-Sheet Feeder is supported.
s3300mfp-154
Phaser 3300MFP Service Manual