Paper Rolled In The Opc; Defective Adf - Xerox Phaser 3300 Servce Manual

Paper rolled in the OPC

Defective ADF

Phaser 3300MFP Service Manual
Paper is rolled up in the OPC.
Check and Cause
1. Paper is too thin.
2. The face of paper is curled.
ADF (Automatic document Feeder) does not operate properly
Check and Cause
1. Check if ADF rubber and HOLDER
rubber are damaged.
2. Check if the document sensors of ADF
Assembly (3 paper sensors) are normal.
General Troubleshooting
Solution
1. Recommend to use normal paper
thickness.
2. How to remove the rolled paper in the
OPC.
Remove the paper while turning the
OPC against the ongoing direction.
Clean fingerprints on the OPC gently
with soft cloth dampened with water, or
tissue.
.
Solution
1. Replace the contaminated or damaged
part.
2. If you cannot confirm the damaged
part with the naked eye, try replacing the
ADF Assembly.
4-9