Phaser 3300MFP Service Manual
4. Remove the three screws securing the Feed Bracket Unit and then
remove the Feed Bracket Unit and Feed2 Shaft.
Feed Bracket
Feed2 Shaft
5. If necessary, release the three E-Rings securing the Gears (T2 Idle,
Retard, Idle) and then remove the Gears from the Feed Bracket, as
shown below.
Idle Gear
Retard Gear
Note
Be aware of the E-Rings to ensure they are not lost.
Service Parts Disassembly
Bracket
T2 Idle Gear
s3300mfp-138
8-43