Xerox Phaser 3300 Servce Manual page 89

Message
Not Assigned
[No Paper] Add Paper
One Page is Too Large
Low Heat Error Cycle
Power
LSU Motor Error Cycle
Power
LSU Hsync Error Cycle
Power
Main Motor Locked
Mail Exceeds Server
Support
Memory Dial Full
Memory Full
MP Tray Paper Empty
Network Error
[No Answer]
Not Assigned
[No Paper] Add Paper
One Page is Too Large
Open Heat Error Cycle
Power
Operation Not Assigned
Over Heat Error Cycle
Power
Paper Jam 0 Open/Close
Door
Paper Jam 1 Open/Close
Door
Paper Jam 2 Check
Inside
Phaser 3300MFP Service Manual
Meaning
The speed button or speed dial number
you tried to use has no number or e-mail
address assigned to it.
The paper in the tray has run out.
Single page data exceeds the configured
mail size.
There is a problem in the fuser unit.
A problem has occurred in the LSU (Laser
Scanning Unit).
A problem has occurred in the LSU (Laser
Scanning Unit).
There is a problem in the main motor.
The mail size is larger than the supported
size by SMTP server.
You are trying to schedule a fax job when
memory for storing fax jobs is full.
The memory is full.
There is no paper in the multi-purpose tray. Load paper in the multi-purpose tray.
There is a problem with the network.
The receiving fax machine has not
answered after several redial attempts.
The speed button or speed dial number
you tried to use has no number or email
address assigned to it.
The paper in the tray has run out.
Single page data exceeds the configured
mail size.
There is a problem in the fuser unit.
You are in the Add Page/Cancel Job
operation, but there are no jobs stored.
There is a problem in the fuser unit.
Paper has jammed in the feeding area of
the tray.
Paper has jammed in the fuser area.
Paper has jammed in the paper exit area.
Suggested solutions
Enter the number or email address manually using
the number keypad or store the number or address.
Load paper in the tray.
Reduce the resolution and try again.
Unplug the power cord and plug it back in. If the
problem persists, please call for service.
Unplug the power cord and plug it back inches. If the
problem persists, please call for service.
Unplug the power cord and plug it back inches. If the
problem persists, please call for service.
Open and then close the front cover.
Divide your mail or reduce the resolution.
Wait until a scheduled job is completed.
Delete unnecessary fax jobs and retransmit after
more memory becomes available. Alternatively, split
the transmission into more than one operation.
Contact your network administrator.
Try again. Make sure that the receiving machine is
operational.
Enter the number or email address manually using
the number keypad or store the number or address.
Load paper in the tray.
Reduce the resolution and try again.
Unplug the power cord and plug it back in. If the
problem persists, please call for service.
Check the display to see if there are any scheduled
jobs.
Unplug the power cord and plug it back in. If the
problem persists, please call for service.
Clear the jam.
Clear the jam.
Clear the jam.
Error Messages and Codes
3-9