Xerox Phaser 3300 Servce Manual page 12

Moving the Printer
x
Warning
Parts of the printer are hot. Wait at least 30 minutes for the printer to cool
before moving or packing the printer.
Use the power switch to turn Off the printer, and unplug all cables and cords.
Do not turn the printer Off by pulling the power cord or using a power-strip
with an On/Off switch.
Warning
Back injury could result if you do not lift the printer properly.
The printer should be lifted by two persons. Use safety lifting and handling
techniques when moving the printer.
Always move the printer separately from Tray 2.
When shipping the printer, repack the printer using the original packing
material and boxes or a Xerox packaging kit. Instructions for repacking the
printer are included in the kit. If you do not have all the original packaging, or
are unable to repackage the printer, contact your local Xerox service
representative.
Caution
Failure to repackage the printer properly for shipment can result in damage to
the printer. Damage to the printer caused by improper packaging is not
covered by the Xerox warranty, service agreement, or Total Satisfaction
Guarantee.
19 kg
42 lb.
s3300mfp-208
Phaser 3300MFP Service Manual