Defective Fax Receive (2); Defective Fax Receive (3); Defective Fax Receive (4); Defective Automatic Receiving - Xerox Phaser 3300 Servce Manual

Defective FAX RECEIVE (2)

Defective FAX RECEIVE (3)

Defective FAX RECEIVE (4)

Defective Automatic Receiving

Phaser 3300MFP Service Manual
The received data is distorted or cut-off when printed.
Check and Cause
1. Check if there is NOISE when pressing
Manual Dial.
2. Ask the forwarding side to check the
image quality of another machine
receiving a FAX.
The phone is ringing continuously, but it cannot receive.
Check and Cause
Check if the RECEIVE Mode is TEL MODE
or FAX MODE.
The received data is reduced by more than 50% when printed.
Check and Cause
Check the FAX status of the forwarding
side.
The automatic receiving function is not working.
Check and Cause
1. Check if the RECEIVE Mode is TEL
MODE or FAX MODE.
General Troubleshooting
Solution
1. If it makes NOISE, rearrange the
telephone line. (Refer to 'Defective FAX
RECEIVE'.)
2. Check if the FAX status of the
forwarding side is normal.
Solution
Even when the RECEIVE Mode is changed
to FAX MODE, it cannot receive, then
replace the LIU and the Control Board in
sequence.
Solution
After checking the data of the forwarding
side, correct the FAX of the forwarding
side.
Solution
1. If the RECEIVE Mode is set to the TEL
MODE, reset it to the FAX MODE.
2. Even after the RECEIVE Mode is
changed to the FAX Mode, it cannot
receive, then replace the LIU and the
Control Board in sequence.
4-15