Duplex Guide Housing (With Feed Roller) - Xerox Phaser 3300 Servce Manual

Service Parts Disassembly

Duplex Guide Housing (With Feed Roller)

8-38
Note
To allow better access to the parts, lay the machine on its back. Refer to
"Laying the Unit on its Back" on page 8-4.
Before you remove the Duplex Guide Housing, you must remove:
Duplex Unit (page 8-35)
Pick Up Roller Shaft
1. Remove the screw securing the white Duplex Unit front guide on the left
side and remove the guide from the Duplex Guide Housing.
2. Remove the two screws securing the Duplex Guide Housing.
Duplex Unit Front Guide (Left)
3. Unplug the one connector from the sensor (Photo Interrupter) and remove
the Duplex Guide Housing (with Feed Roller), as shown below.
(page 8-37)
Phaser 3300MFP Service Manual
s3300mfp-123
s3300mfp-124