Background; Ghost (1) - Xerox Phaser 3300 Servce Manual

Print-Quality Troubleshooting

Background

Digital Printer
Digital Printer
Digital Printer
Digital Printer
Digital Printer

Ghost (1)

Digital Printer
Digital Printer
Digital Printer
Digital Printer
Digital Printer
Digital Printer
5-14
Light dark background appears in whole area of the printing.
Check and Cause
Recycled paper has been used.
The life of the Print Cartridge has
expired.
Does the Transfer Roller rotate
smoothly?
The HVPS is normal?
Ghost image occurs at 75.5 mm intervals of the OPC drum on the output.
Check and Cause
Bad contacts caused by contamination
from toner particles between high
voltage terminal in the main body and
the electrode of the Print Cartridge.
Bad contacts caused by contamination
from toner particles between high
voltage terminal in the main body and
the one in the HVPS board.
The life of print cartridge is expired.
Transfer roller life (70.000 sheets) has
expired.
Abnormal low temperature
(below 10 °C).
Damaged cleaning blade in the print
cartridge.
Solution
Quality is not guaranteed when using
recycled paper.
Replace the print cartridge.
Clean the bushing on the transfer roller.
Replace the HVPS.
Solution
Clean the contaminated terminals.
Problem in the print cartridge. Replace
the print cartridge and re-run the job.
Replace the Control Board if not solved
by the previous suggestions.
If not solved by the previous suggestion,
check the transfer roller lifetime and
replace it.
Wait about 1 hour after power on before
using printer.
Problem in the print cartridge, replace
the print cartridge and try to print out.
Phaser 3300MFP Service Manual