Removing A Custom Preset; Configuring The Bar Code Decoding Camera Presets - Psion Teklogix 7527C-G2 User Manual

Appendix C: Teklogix Imagers Applet

Removing A Custom Preset

- Highlight the parameter, and then press the [SPACE] key or double-click
the parameter.
- An associated dialog box containing the valid range of values for the parameter and
the current setting like the sample screen following is displayed.
- Type a value in the field provided.
•• For a parameter that toggles between two values such as on or off and enabled or
disabled:
- Highlight the parameter and then press the [SPACE] key, or double-click on the
parameter. Either method toggles between the two available values.
•• When you’'ve completed your edits, tap on OK.
The parameter list is displayed; the new value for the changed parameter is shown.
•• Tap on OK to exit to the preset list and save the changes.
C.3.7 Removing A Custom Preset
•• Highlight the custom preset you want to delete, and tap on the Remove button.
A window is displayed warning you that you are about to remove a preset.
•• Tap on Yes to remove the preset or No to cancel the operation.
C.4

Configuring The Bar Code Decoding Camera Presets

To configure the bar code decoding camera presets:
•• Tap on Start>Settings>System tab.
•• Tap on the Barcoding tab.
C-8 WORKABOUT PRO
3
with Windows Mobile 6.1 User Manual