The following screen is displayed:
Figure C.1 Imaging Tab
This window lists all the presets, both predefined and custom. Presets are identified
as follows:
•
Predefined presets are marked as read-only.
•
Custom presets are marked as read and write.
•
One preset – either predefined or custom – is marked as active.
C.3.2
Selecting A Camera
If your WORKABOUT has more than one built-in camera, one camera must be selected for
configuration. To select a camera:
•
Tap on the Camera Presets drop-down menu to view the camera options.
•
Choose a camera – specifically, Front Imager which is located at the top of the unit.
C.3.3
Setting The Active Preset
An active preset has an A to the right; in Figure C.1 on page C-5, the active preset is Low
light near. To set an active preset:
•
Highlight the preset, and tap on the Activate button.
C.3.4
Viewing A Preset
To view the parameter settings in a preset:
•
Highlight a preset, and tap on the View button.
3
WORKABOUT PRO
with Windows Mobile 6.1 User Manual
Appendix C: Teklogix Imagers Applet
Selecting A Camera
C-5