Psion Teklogix 7527C-G2 User Manual page 74

Chapter 3: Get To Know WORKABOUT PRO
Inserting and Removing the Card
•• On a WORKABOUT PRO
indicates.
•• On a WORKABOUT PRO
slots.
•• Orient the SD/MMC or SIM card according to the legend stamped into the battery
well plastic.
•• For a SD/MMC card, slide the card into the lower slot, pushing it inward until it latches
into place.
•• For a SIM card, slide the card into the upper slot, pushing it inward until it latches
into place. Note that a label over the SIM opening needs to be removed before the card
can be inserted (only after a GSM/UMTS radio is installed).
•• On a WORKABOUT PRO
snap it shut.
On a WORKABOUT PRO
locking feature.
•• Push the door down so the dimples fit into the slot cut into the battery
compartment plastic.
To remove the card:
•• Gently press the card inward until it unlatches, and the card is ejected from the slot.
56 WORKABOUT PRO
3
3
S, the metal SD door incorporates dimples that act as a
3
with Windows Mobile 6.1 User Manual
3
C, pull the hinged door down as the arrow icon on the door
3
S, pull the metal door upward to expose the SD/MMC
3
C, swing the hinged door back up into place, and gently
Dimples