Ean 13 Settings - Psion Teklogix 7527C-G2 User Manual

Appendix D: Bar Code Settings

EAN 13 Settings

Minimum And Maximum Length
The length of a code refers to the number of characters (i.e., human readable characters), in-
cluding check digit(s). Double-tapping on these parameters displays a screen in which you
can set the minimum and maximum allowable code lengths –– 0 to 80.
Add/Remove Data
Refer to “"Add/Remove Data”" on page D-9 for details.
Length Restriction
Refer to “"Length Restriction”" on page D-8 for details.
D.3.6 EAN 13 Settings
Enabled
Set this parameter to on to enable “"EAN 13”".
Check Digit
If you enable this parameter, a check digit is included with the decoded bar code data.
Addendum Add-on 2 And Addendum Add-on 5
An addendum is a separate bar code, supplementary to the main bar code. Enabling these
parameters defines the length of the addendum bar code to either 2 or 5 characters.
Addendum Required
When this parameter is set to on, the scanner does not accept the main bar code without an
addendum.
Addendum Separator
“"Addendum Separator”" is a space that is added between the EAN 13 bar code and the Add-
on code/Addenda. When this parameter is set to on, the scanner does not accept the main bar
code without an addendum.
ISBN Translate
When this parameter (International Standard Book Number) is enabled, the first 3 characters
(‘'978’') are ignored and the checksum (0.9, ‘'X’') is calculated on the remaining characters.
Add/Remove Data
Refer to “"Add/Remove Data”" on page D-9 for details.
D-24 WORKABOUT PRO
3
with Windows Mobile 6.1 User Manual